Used to charge mobile phone, MP3, pad, or other USB-charged device. You can place the panel in the sun and use it to directly charge your device.
Suitable for: Cycling, Climbing, Hiking, Camping, Traveling, etc.
1.Build-in industrial micro controller.
2.Fully 4-stage PWM charge management.
3.One-key setting,digital display, auto memory function.
4.Dual mosfet Reverse current protections, low heat productions.
5.Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
- ISC: 3.33
- Voc: 20V
- Power: 50W
- Ipmax: 2.77A
- Output: 5V/18V
- Size: 540*280*2.5mm
- Waterproof rate: IP65
- Conversion rate: 19.6-20%
- Material: Monocrystalline silicon cell
- Model: PWM
- Buck charge: 28.8V
- Float charge: 27.4V
- USB output: 5V/3A
- Self-consume: <10mA
- Discharge stop: 21.4V
- Voltage: DC 12V/24V
- Max solar input: <50V
- Current: 10A/20A/30A/40A
- Rated working current: ≤20A
- Discharge reconnect: 25.2V
- Working temperature: -35℃~60℃
- Output voltage: 12V/24V Automatically distinguish voltage
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
- 1X 50W Solar Panel
- 1X Crocodile Clip
- 1X Car Charger